dmesg - RX460 Ubuntu 16.04 amdgpu
Linux version 4.8.0-36-generic (buildd@lgw01-18) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #36~16.04.1-Ubuntu SMP Sun Feb 5 09:39:57 UTC 2017 (Ubuntu 4.8.0-36.36~16.04.1-generic 4.8.11)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000bb694fff] usable
BIOS-e820: [mem 0x00000000bb695000-0x00000000bb6c4fff] reserved
BIOS-e820: [mem 0x00000000bb6c5000-0x00000000bb984fff] usable
BIOS-e820: [mem 0x00000000bb985000-0x00000000bba3ffff] ACPI NVS
BIOS-e820: [mem 0x00000000bba40000-0x00000000bd9bdfff] reserved
BIOS-e820: [mem 0x00000000bd9be000-0x00000000bd9fcfff] type 20
BIOS-e820: [mem 0x00000000bd9fd000-0x00000000bd9fdfff] usable
BIOS-e820: [mem 0x00000000bd9fe000-0x00000000bdc03fff] ACPI NVS
BIOS-e820: [mem 0x00000000bdc04000-0x00000000bdd5afff] usable
BIOS-e820: [mem 0x00000000bdd5b000-0x00000000be947fff] reserved
BIOS-e820: [mem 0x00000000be948000-0x00000000be97ffff] usable
BIOS-e820: [mem 0x00000000be980000-0x00000000beff0fff] reserved
BIOS-e820: [mem 0x00000000beff1000-0x00000000beffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xbba09000 ACPI 2.0=0xbba09000 SMBIOS=0xf04d0 MPS=0xfd530
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A88X-ITX+, BIOS P3.40 01/14/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd800-0x000fd80f] mapped at [ffff88ae000fd800]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88ae00098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x154a3b000, 0x154a3bfff] PGTABLE
BRK [0x154a3c000, 0x154a3cfff] PGTABLE
BRK [0x154a3d000, 0x154a3dfff] PGTABLE
BRK [0x154a3e000, 0x154a3efff] PGTABLE
BRK [0x154a3f000, 0x154a3ffff] PGTABLE
BRK [0x154a40000, 0x154a40fff] PGTABLE
BRK [0x154a41000, 0x154a41fff] PGTABLE
BRK [0x154a42000, 0x154a42fff] PGTABLE
BRK [0x154a43000, 0x154a43fff] PGTABLE
BRK [0x154a44000, 0x154a44fff] PGTABLE
BRK [0x154a45000, 0x154a45fff] PGTABLE
BRK [0x154a46000, 0x154a46fff] PGTABLE
RAMDISK: [mem 0x33306000-0x3597afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BBA09000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BBA09090 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BBA0F468 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160422/tbfadt-658)
ACPI: DSDT 0x00000000BBA091C0 0062A7 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BBA36F80 000040
ACPI: APIC 0x00000000BBA0F578 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BBA0F5F8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000BBA0F640 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BBA0F6E0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BBA0F720 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: AAFT 0x00000000BBA0F758 0002DC (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: UEFI 0x00000000BBA0FA38 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: BGRT 0x00000000BBA0FA80 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BBA0FAB8 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x00000000BBA10658 000346 (v02 AMD BANTRY 00000002 MSFT 04000000)
ACPI: CRAT 0x00000000BBA109A0 000528 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x00000000BBA10EC8 0016E4 (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: SSDT 0x00000000BBA125B0 000ABB (v01 AMD CPMDFDGP 00000001 INTL 20051117)
ACPI: SSDT 0x00000000BBA13070 001519 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
NODE_DATA(0) allocated [mem 0x23effb000-0x23effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000bb694fff]
node 0: [mem 0x00000000bb6c5000-0x00000000bb984fff]
node 0: [mem 0x00000000bd9fd000-0x00000000bd9fdfff]
node 0: [mem 0x00000000bdc04000-0x00000000bdd5afff]
node 0: [mem 0x00000000be948000-0x00000000be97ffff]
node 0: [mem 0x00000000beff1000-0x00000000beffffff]
node 0: [mem 0x0000000100000000-0x000000023effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
On node 0 totalpages: 2075283
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 11948 pages used for memmap
DMA32 zone: 764660 pages, LIFO batch:31
Normal zone: 20416 pages used for memmap
Normal zone: 1306624 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbb695000-0xbb6c4fff]
PM: Registered nosave memory: [mem 0xbb985000-0xbba3ffff]
PM: Registered nosave memory: [mem 0xbba40000-0xbd9bdfff]
PM: Registered nosave memory: [mem 0xbd9be000-0xbd9fcfff]
PM: Registered nosave memory: [mem 0xbd9fe000-0xbdc03fff]
PM: Registered nosave memory: [mem 0xbdd5b000-0xbe947fff]
PM: Registered nosave memory: [mem 0xbe980000-0xbeff0fff]
PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff88b03ec00000 s107864 r8192 d31400 u524288
pcpu-alloc: s107864 r8192 d31400 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2042830
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7836336K/8301132K available (8812K kernel code, 1439K rwdata, 3820K rodata, 1552K init, 1296K bss, 464796K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:1000 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3394.093 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6788.18 BogoMIPS (lpj=13576372)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffffbb4ed000 - ffffffffbb4f5000)
ftrace: allocating 33410 entries in 131 pages
smpboot: APIC(10) Converting physical 1 to logical package 0
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-7700K Radeon R7, 10 Compute Cores 4C+6G (family: 0x15, model: 0x30, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (27152.74 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbb985000-0xbba3ffff] (765952 bytes)
PM: Registering ACPI NVS region [mem 0xbd9fe000-0xbdc03fff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 3:48:03, date: 02/18/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: System wakeup disabled by ACPI
pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb06000-0xfeb07fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xfeb04000-0xfeb05fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb0d000-0xfeb0d7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb0c000-0xfeb0cfff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb0b000-0xfeb0b0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
pci 0000:01:00.0: [1002:67ef] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:02:00.0: [168c:0034] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe97ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xfe980000-0xfe98ffff pref]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfed3ffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
pci 0000:04:00.0: [1969:10a1] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfe800000-0xfe83ffff 64bit]
pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.0: bridge window [mem 0xfe800000-0xfe8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *4 5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
SCSI subsystem initialized
libata version 3.00 loaded.
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xbb695000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb985000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbd9fe000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdd5b000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe980000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x040b] has been reserved
system 00:07: [io 0x04d6] has been reserved
system 00:07: [io 0x0c00-0x0c01] has been reserved
system 00:07: [io 0x0c14] has been reserved
system 00:07: [io 0x0c50-0x0c51] has been reserved
system 00:07: [io 0x0c52] has been reserved
system 00:07: [io 0x0c6c] has been reserved
system 00:07: [io 0x0c6f] has been reserved
system 00:07: [io 0x0cd0-0x0cd1] has been reserved
system 00:07: [io 0x0cd2-0x0cd3] has been reserved
system 00:07: [io 0x0cd4-0x0cd5] has been reserved
system 00:07: [io 0x0cd6-0x0cd7] has been reserved
system 00:07: [io 0x0cd8-0x0cdf] has been reserved
system 00:07: [io 0x0800-0x089f] has been reserved
system 00:07: [io 0x0b20-0x0b3f] has been reserved
system 00:07: [io 0x0900-0x090f] has been reserved
system 00:07: [io 0x0910-0x091f] has been reserved
system 00:07: [io 0xfe00-0xfefe] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:07: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:03: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:03: resource 10 [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:03: resource 11 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 39380K (ffff88ae33306000 - ffff88ae3597b000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xaa97b000-0xae97b000] (64MB) mapped at [ffff88aeaa97b000-ffff88aeae97afff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000001ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1487389682.736:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.25)
Allocating IMA blacklist keyring.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.1: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.1:pcie001: service driver pcie_pme loaded
pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.1:pcie001: service driver pcie_pme loaded
pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:15.0:pcie001: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb0b000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.8.0-36-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb09000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.8.0-36-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0c000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.8.0-36-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb0a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.8.0-36-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb08000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.8.0-36-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:14.5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.8.0-36-generic xhci-hcd
usb usb6: SerialNumber: 0000:00:10.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.8.0-36-generic xhci-hcd
usb usb7: SerialNumber: 0000:00:10.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.8.0-36-generic xhci-hcd
usb usb8: SerialNumber: 0000:00:10.1
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 4.8.0-36-generic xhci-hcd
usb usb9: SerialNumber: 0000:00:10.1
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x06003106
microcode: CPU1: patch_level=0x06003106
microcode: CPU2: patch_level=0x06003106
microcode: CPU3: patch_level=0x06003106
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: d6d7cea0e8f669bd202f07c56eca22a865778209'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 5:430:816
rtc_cmos 00:05: setting system clock to 2017-02-18 03:48:04 UTC (1487389684)
acpi_cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1552K (ffffffffbb369000 - ffffffffbb4ed000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1412K (ffff88af5409f000 - ffff88af54200000)
Freeing unused kernel memory: 276K (ffff88af545bb000 - ffff88af54600000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:04: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/LNXVIDEO:01/input/input4
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
ahci 0000:00:11.0: version 3.0
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d100 irq 37
ata2: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d180 irq 37
ata3: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d200 irq 37
ata4: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d280 irq 37
ata5: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d300 irq 37
ata6: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d380 irq 37
ata7: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d400 irq 37
ata8: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d480 irq 37
alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [bc:5f:f4:fb:94:85]
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
Found CRAT image with size=1320
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=4 id_base=16
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=17
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=19
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (POLARIS11 0x1002:0x67EF 0x148C:0x2374 0xCF).
[drm] register mmio base: 0xFEA00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 2097152
[drm] probing gen 2 caps for device 1022:1425 = 733d03/e
[drm] probing mlw for device 1022:1425 = 733d03
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.PB21.VGA.ATC0] (Node ffff88b0360c4dc0), AE_NOT_FOUND (20160422/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.PCI0.PB21.VGA.ATCS] (Node ffff88b0360c49d8), AE_NOT_FOUND (20160422/psparse-542)
[drm] UVD is enabled in VM mode
amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: C99401
amdgpu 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
amdgpu 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits GDDR5
[TTM] Zone kernel: Available graphics memory: 4043810 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 2048M of GTT memory ready.
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: powerplay initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DVI-D-1
[drm] HPD4
[drm] DDC: 0x4878 0x4878 0x4879 0x4879 0x487a 0x487a 0x487b 0x487b
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000008, cpu addr 0xffff88b02c40f008
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000018, cpu addr 0xffff88b02c40f018
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000028, cpu addr 0xffff88b02c40f028
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000038, cpu addr 0xffff88b02c40f038
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000048, cpu addr 0xffff88b02c40f048
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000080000058, cpu addr 0xffff88b02c40f058
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000068, cpu addr 0xffff88b02c40f068
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000078, cpu addr 0xffff88b02c40f078
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000080000088, cpu addr 0xffff88b02c40f088
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x0000000080000098, cpu addr 0xffff88b02c40f098
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000000800000a8, cpu addr 0xffff88b02c40f0a8
[drm] Found UVD firmware Version: 1.79 Family ID: 16
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x000000000049c420, cpu addr 0xffff93fac165a420
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000000800000c8, cpu addr 0xffff88b02c40f0c8
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000000800000d8, cpu addr 0xffff88b02c40f0d8
[AVFS] Something is broken. See log!
[drm] ring test on 0 succeeded in 12 usecs
[drm] ring test on 1 succeeded in 31 usecs
[drm] ring test on 2 succeeded in 18 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 3 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] ring test on 8 succeeded in 3 usecs
[drm] ring test on 9 succeeded in 7 usecs
[drm] ring test on 10 succeeded in 7 usecs
[drm] ring test on 11 succeeded in 1 usecs
[drm] UVD initialized successfully.
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
usb 3-2: new full-speed USB device number 2 using ohci-pci
[drm] ring test on 12 succeeded in 5 usecs
[drm] ring test on 13 succeeded in 10 usecs
[drm] VCE initialized successfully.
usb 4-5: new full-speed USB device number 2 using ohci-pci
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-9: INTEL SSDSC2CT120A3, 300i, max UDMA/133
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2CT12 300i PQ: 0 ANSI: 5
usb 3-2: New USB device found, idVendor=046d, idProduct=c534
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Receiver
usb 3-2: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usb 4-5: string descriptor 0 read error: -22
usb 4-5: New USB device found, idVendor=13d3, idProduct=3393
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:046D:C534.0001/input/input6
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[drm] fb mappable at 0xC06A6000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
sd 2:0:0:0: Attached scsi generic sg0 type 0
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-2/input0
[drm] ib test on ring 0 succeeded
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:046D:C534.0002/input/input7
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
tsc: Refined TSC clocksource calibration: 3393.827 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30eb87155f9, max_idle_ns: 440795312243 ns
hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-2/input1
[drm] ib test on ring 12 succeeded
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.PB21.VGA.ATC0] (Node ffff88b0360c4dc0), AE_NOT_FOUND (20160422/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.PCI0.PB21.VGA.ATCS] (Node ffff88b0360c49d8), AE_NOT_FOUND (20160422/psparse-542)
[drm] Initialized amdgpu 3.3.0 20150101 for 0000:01:00.0 on minor 0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
random: fast init done
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[298]: Received request to flush runtime journal from PID 1
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
ath9k 0000:02:00.0: enabling device (0000 -> 0002)
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffff93fac1200000, irq=40
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input11
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input12
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
usbcore: registered new interface driver btusb
clocksource: Switched to clocksource tsc
usbcore: registered new interface driver ath3k
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
Adding 7259132k swap on /dev/sda3. Priority:-1 extents:1 across:7259132k SSFS
audit: type=1400 audit(1487389687.236:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=892 comm="apparmor_parser"
audit: type=1400 audit(1487389687.236:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=892 comm="apparmor_parser"
audit: type=1400 audit(1487389687.236:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=892 comm="apparmor_parser"
audit: type=1400 audit(1487389687.236:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=892 comm="apparmor_parser"
audit: type=1400 audit(1487389687.236:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=890 comm="apparmor_parser"
audit: type=1400 audit(1487389687.236:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=890 comm="apparmor_parser"
audit: type=1400 audit(1487389687.236:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=891 comm="apparmor_parser"
audit: type=1400 audit(1487389687.236:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=891 comm="apparmor_parser"
audit: type=1400 audit(1487389687.236:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=891 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3393819424 Hz
vboxdrv: Successfully loaded version 5.1.4 (interface 0x00260000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
random: crng init done
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
alx 0000:04:00.0 eth0: NIC Up: 1 Gbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wlan0: authenticate with 88:57:ee:d8:13:07
wlan0: send auth to 88:57:ee:d8:13:07 (try 1/3)
wlan0: authenticated
wlan0: associate with 88:57:ee:d8:13:07 (try 1/3)
wlan0: RX AssocResp from 88:57:ee:d8:13:07 (capab=0x1011 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country IE
wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:57:ee:d8:13:07
IPv6: ADDRCONF(NETDEV_UP): lxcbr0: link is not ready
audit_printk_skb: 75 callbacks suppressed
audit: type=1400 audit(1487389693.700:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/lxc-start" pid=2766 comm="apparmor_parser"
audit: type=1400 audit(1487389693.708:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default" pid=2787 comm="apparmor_parser"
audit: type=1400 audit(1487389693.708:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-cgns" pid=2787 comm="apparmor_parser"
audit: type=1400 audit(1487389693.708:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-mounting" pid=2787 comm="apparmor_parser"
audit: type=1400 audit(1487389693.708:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-nesting" pid=2787 comm="apparmor_parser"
usb 3-2: USB disconnect, device number 2